AASHTO T 113-22
Standard Method of Test for Lightweight Particles in Aggregate (ASTM Designation: C123/C123M-12)
standard by American Association of State and Highway Transportation Officials, 2022
Side Navigation
X
TAPPI TIP 0402-32
Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipment
standard by Technical Association of the Pulp and Paper Industry, 07/31/2023
SAE J3094_202302
Test Procedure for Internal Heat Exchangers of Mobile Air-Conditioning Systems with R-134a or R-1234yf Refrigerant
standard by SAE International, 02/14/2023
IEEE P1801
IEEE Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
standard by IEEE,
AS B18-1940
Cold drawn weldless steel tubes for boilers and unfired pressure vessels [for designed steam temperatures not exceeding 850 degrees F. (454 degrees C.)]
standard by Standards Australia, 01/01/1940
ASTM C134-95(2023)
Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
standard by ASTM International, 08/01/2023
IEC 61158-6-2 Ed. 5.0 en:2023
Industrial communication networks – Fieldbus specifications – Part 6-2: Application layer protocol specification – Type 2 elements
standard by International Electrotechnical Commission, 03/01/2023
AS U7-1952
Specification for 12 volt 22 ampere-hour lead-acid batteries for use in aircraft (detail requirements)
standard by Standards Australia, 01/01/1952
IEC 60601-2-2 Ed. 6.1 b:2022
Medical electrical equipment – Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 02/01/2023
SAE AS9553C
NUT – HEXAGON, BOSS CONNECTION, CRES – UNS S30400, 75 KSI (Stabilized: Aug 2023)
standard by SAE International, 08/01/2023