NACE TM0198-98
Slow Strain Rate Test Method for Screening Corrosion Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service
standard by National Association of Corrosion Engineers, 01/01/1998
Side Navigation
X
AWPA A66-23
Standard Method for Determination of Chromium in Chromium Containing Preservatives
standard by American Wood Protection Association, 2023
IEC 61676 Ed. 2.0 b:2023
Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
standard by International Electrotechnical Commission, 03/01/2023
SAE AMS4942H
Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
standard by SAE International, 07/08/2022
IEC 63171-7 Ed. 1.0 en:2023
Connectors for electrical and electronic equipment – Part 7: Detail specification for up to 7 ways including PE or FE (data/power) and shield pin, free and fixed circular connectors for balanced single-pair data transmission with current-carrying capacity – Mechanical mating information, pin assignment and additional requirements for type 7
standard by International Electrotechnical Commission, 05/01/2023
IPC A-47-G
Composite Test Pattern Ten-Layer Phototool – Gerber Format
standard by Association Connecting Electronics Industries,
IEC 60068-2-17 Ed. 5.0 b:2023
Environmental Testing – Part 2-17: Tests – Test Q: Sealing
standard by International Electrotechnical Commission, 06/01/2023
CGA G-13
Storage and Handling of Silane and Silane Mixtures
standard by Compressed Gas Association, 01/01/2023
AS 60984:2023
Live working – Electrical insulating sleeves (IEC 60984:2014 (ED. 2.0) MOD)
standard by Standards Australia, 03/24/2023
ASTM D6153-23
Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
standard by ASTM International, 05/01/2023