Side Navigation

X

AASHTO T 157-12 (2016)

Standard Method of Test for Air-Entraining Admixtures for Concrete (ASTM C 233/C 233M-10a)
standard by American Association of State and Highway Transportation Officials, 2012

AASHTO MASH-2

Manual for Assessing Safety Hardware, Second Edition
standard by American Association of State and Highway Transportation Officials, 2016

AASHTO M 210-09

Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM Designation: C 490-07)
standard by American Association of State and Highway Transportation Officials, 2009

AASHTO M 167M/M 167-17

Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches (ASTM Designation: A 761/A 761M-04)
standard by American Association of State and Highway Transportation Officials, 2017

AASHTO PP 60-14 (R2016)

Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
standard by American Association of State and Highway Transportation Officials, 2014

AASHTO PP 76-13 (2019)

Standard Practice for Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures
standard by American Association of State and Highway Transportation Officials, 2013

AASHTO T 112-00 (2017)

Standard Method of Test for Clay Lumps and Friable Particles in Aggregate (ASTM C 142-97)
standard by American Association of State and Highway Transportation Officials, 2000

AASHTO PP 96-18

Standard Specification for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
standard by American Association of State and Highway Transportation Officials, 2018

AASHTO M 252-06

Standard Specification for Corrugated Polyethylene Drainage Pipe
standard by American Association of State and Highway Transportation Officials,