AASHTO R 91-18
Standard Practice for Determining Aggregate Source Shape Values from Digital Image Analysis Shape Properties
standard by American Association of State and Highway Transportation Officials, 2018
Side Navigation
X
AASHTO PP 92-19
Standard Specification for Preparation of Test Specimens Using the Plastic Mold Compaction Device
standard by American Association of State and Highway Transportation Officials, 2019
AASHTO R 90-18
Standard Practice for Sampling Aggregate Products
standard by American Association of State and Highway Transportation Officials, 2018
AASHTO M 167M/M 167-17
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches (ASTM Designation: A 761/A 761M-04)
standard by American Association of State and Highway Transportation Officials, 2017
AASHTO PP 60-14 (R2016)
Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
standard by American Association of State and Highway Transportation Officials, 2014
AASHTO M 254-06 (2019)
Standard Specification for Corrosion-Resistant Coated Dowel Bars
standard by American Association of State and Highway Transportation Officials, 2006
AASHTO PP 76-13 (2019)
Standard Practice for Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures
standard by American Association of State and Highway Transportation Officials, 2013
AASHTO M 292M/M 292-09
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both (ASTM Designation: A 194/A 194M-08a)
standard by American Association of State and Highway Transportation Officials, 2009
AASHTO M 203M/M 203-12 (2016)
Standard Specification for Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement (ASTM A 416/A 416M-10)
standard by American Association of State and Highway Transportation Officials, 2012
AASHTO M 111M/M 111-14
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products (ASTM Designation: A 123/A 123M-12)
standard by American Association of State and Highway Transportation Officials, 2014