AASHTO T 24M/T 24-07 (2011)
Standard Method of Test for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete (ASTM C 42/C 42M-04)
standard by American Association of State and Highway Transportation Officials, 2007
Side Navigation
X
AASHTO M 240-11
Standard Specification for Blended Hydraulic Cement
standard by American Association of State and Highway Transportation Officials, 2011
AASHTO T 111-09
Standard Method of Test for Mineral Matter or Ash in Asphalt Materials
standard by American Association of State and Highway Transportation Officials, 2009
AASHTO R 32-19
Standard Recommended Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
standard by American Association of State and Highway Transportation Officials, 2019
AASHTO T 313-08
Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
standard by American Association of State and Highway Transportation Officials, 08/01/2008
AASHTO T 209-09
Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt (HMA)
standard by American Association of State and Highway Transportation Officials, 2009
AASHTO MP 36-18
Standard Specification for Materials for Asphalt Tack Coat
standard by American Association of State and Highway Transportation Officials, 2018
AASHTO PP 61-09
Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
standard by American Association of State and Highway Transportation Officials, 2009
AASHTO MP 21-11
Standard Specification for Polypropylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
standard by American Association of State and Highway Transportation Officials, 2011
AASHTO T 276-17
Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength (ASTM Designation: C918-13)
standard by American Association of State and Highway Transportation Officials, 2017