Side Navigation

X

AASHTO TP 64-03 (2007)

Standard Method of Test for Predicting Chloride Penetration of Hydraulic Cement Concrete by the Rapid Migration Procedure
standard by American Association of State and Highway Transportation Officials, 2003

AASHTO TF-30-1

Task Force 30 Report – Two Parts: Guide Specifications for Concrete Overlay of Pavements and Bridge Decks
standard by American Association of State and Highway Transportation Officials, 01/01/1990

AASHTO TVF-1

Guide for Geometric Design of Transit Facilities on Highways and Streets, 1st Edition
standard by American Association of State and Highway Transportation Officials, 2014

AASHTO T 59-13

Standard Method of Test for Emulsified Asphalts
standard by American Association of State and Highway Transportation Officials, 2013

AASHTO T 84-10

Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (ASTM Designation: C 128-07a)
standard by American Association of State and Highway Transportation Officials, 2010

AASHTO TP 79-12

Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
standard by American Association of State and Highway Transportation Officials, 2012

AASHTO VLVLR-1

Guidelines for Geometric Design of Very Low-Volume Local Roads (ADT<400)
Handbook / Manual / Guide by American Association of State and Highway Transportation Officials, 01/01/2001

AASHTO TP 124-16

Provisional Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature
standard by American Association of State and Highway Transportation Officials, 2016

AASHTO TP 77-09 (2011)

Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
standard by American Association of State and Highway Transportation Officials, 2009

AASHTO TP 93-12

Standard Method of Test for Determining Formwork Pressure of Fresh Self-Consolidating Concrete Using Pressure Transducers
standard by American Association of State and Highway Transportation Officials, 2012