ANSI/NEMA C29.11-1989 (R1996)
American National Standard for Composite Suspension Insulators for Overhead Transmission Lines – Tests
standard by American National Standards Institute / National Electrical Manufacturers Association, 01/01/1989
Side Navigation
X
ANSI/NEMA WC 66/ICEA S-116-732-2013
Standard for Category 6 and Category 6A, 100 Ohm Individually Unshielded Twisted Pairs, Indoor Cables (With Or Without An Overall Shield) For Use In LAN Communication Wiring Systems
standard by American National Standards Institute / National Electrical Manufacturers Association, 2014
ANSI/NEMA WD 6-2016
American National Standard for Wiring Devices – Dimensional Specifications
standard by American National Standards Institute / National Electrical Manufacturers Association, 02/11/2016
ANSI/NEMA WC 57-2004/ICEA S-73-532-2004
Standard for Control, Thermocouple Extension and Instrumentation Cables
standard by American National Standards Institute / National Electrical Manufacturers Association, 12/20/2004
ANSI/NEMA HP 8-2013
Electrical and Electronic Cross-Linked, Modified Low-Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (rated 105 degrees C-600 V), ZHDM (rated 90 degrees C-600 V), ZHDH (rated 90 degrees C-600 V), ZH (rated 125 degrees C-600 V), and ZHX (rated 125 degrees C-1000 V)
standard by American National Standards Institute / National Electrical Manufacturers Association, 01/23/2013
ANSI/NEMA WC 51 ICEA P-54-440-2009 (R2014)
Ampacities of Cables Installed in Cable Trays
standard by American National Standards Institute / National Electrical Manufacturers Association, 05/20/2009
ANSI/NEMA FB 11-2000
Plugs, Receptacles and Connectors of the Pin-and-Sleeve Type for Hazardous Locations
standard by American National Standards Institute / National Electrical Manufacturers Association, 12/01/2000
ANSI/NEMA LD 3-2005
High-Pressure Decorative Laminates (HPDL)
standard by American National Standards Institute / National Electrical Manufacturers Association, 01/01/2005
ANSI/NEMA WC 54-2013/ICEA T-26-465
Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Portable Cables for Test
standard by American National Standards Institute / National Electrical Manufacturers Association, 12/13/2012
ANSI/NEMA HP 9-2014
Electrical and Electronic Ethylene-Propylene Diene Elastomer (EPDM) Insulated Hook-Up Wire, Types EP (Rated 125 deg. C; 600 V) and EPD (Rated 125 deg. C; 5000 V)
standard by American National Standards Institute / National Electrical Manufacturers Association, 04/15/2014