AS U20-1956
75 ton, 2 1/2 per cent nickel-chromium-molybdenum steel (limiting ruling section 2 1/2 in.)
standard by Standards Australia, 01/01/1956
Side Navigation
X
AS CS 10.1.6-1934
Equipment and supplies for use in public institutions, Part 1.6: Textile materials – Shrouding
standard by Standards Australia, 02/01/1934
AS SPR 8-1931
Simplified practice recommendation for fibrous plaster sheets
standard by Standards Australia, 01/01/1931
AS 1417:2023
Receiving antennas for radio and television in the VHF and UHF broadcast bands – Design, manufacture and performance of outdoor terrestrial television antennas
standard by Standards Australia, 05/26/2023
AS B52.4-1960
Tables of pipe flanges for land use – Steel flanges for pipes, valves and fittings for working steam pressures above 600 lb. and up to 900 lb. per sq. inch, and temperatures up to 800 degrees F. (427 degrees C.)
standard by Standards Australia, 01/01/1960
AS U18-1956
65 ton, 1 1/2 per cent nickel-chromium-molybdenum steel (limiting ruling section 2 1/2 in.)
standard by Standards Australia, 01/01/1956
AS ISO 5167.6:2023
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, Part 6: Wedge meters
standard by Standards Australia, 06/30/2023
AS H66-1962
Recommended methods for polarographic and spectrographic analysis of high purity zinc and zinc alloys for die casting
standard by Standards Australia, 01/01/1962
AS 3315-1992
Approval and test specification – Particular requirements for ultra-violet and infra-red radiation skin treatment appliances for household and similar use
standard by Standards Australia, 01/01/1992
AS 2282.6-1991
Methods for testing flexible cellular polyurethane, Method 6: Determination of tensile strength and elongation at break
standard by Standards Australia, 01/25/1991