ASD-STAN prEN 3358
Steel FE-PM1503 – solution annealed and precipitation hardened – 1400 <or= Rm <or= 1550 MPa – Bar for machining De <or= 100 mm
Data Sheet by ASD-STAN Standardization, 12/31/1998
Side Navigation
X
ASD-STAN prEN 3847
Paints and varnishes – Determination of sedimentation rating
Data Sheet by ASD-STAN Standardization, 12/31/1997
ASD-STAN prEN 2434-4
Aerospace series-Paints and varnishes-Two component cold curing polyurethane finish-Part 04: High flexibility
Data Sheet by ASD-STAN Standardization, 08/01/2001
ASD-STAN prEN 3497
Titanium TI-P99001 – Annealed – Sheet and strip, cold rolled – a <or= 6 mm – 290 MPa <or= Rm <or= 420 MPa
Data Sheet by ASD-STAN Standardization, 04/26/1993
ASD-STAN prEN 3703
Heat release rate for materials and products under the influence of radiating heat and flames – Test method
Data Sheet by ASD-STAN Standardization, 01/31/1995
ASD-STAN prEN 2406
Heat resisting nickel base alloy Ni-P101-HT – Solution treated and precipitation treated – Bars for forged bolts – D <or= 25 mm
Data Sheet by ASD-STAN Standardization, 05/01/1980
ASD-STAN prEN 3441
Titanium TI-P99001 – Annealed – Sheet and strip, hot rolled a <or= 6 mm – 290 MPa <or= Rm <or= 420 MPa
Data Sheet by ASD-STAN Standardization, 04/26/1993
ASD-STAN prEN 2135
Steel FE-PL61 – Carburized, hardened and tempered – Bar De <or= 40 mm
Data Sheet by ASD-STAN Standardization, 04/22/1986
ASD-STAN prEN 3861
Non-metallic materials – Glass transparencies – Material standard – Thermally tempered soda lime float glass
Data Sheet by ASD-STAN Standardization, 10/31/2001
ASD-STAN prEN 3363
Steel FE-CM68 – solution treated – Rm >or= 485 MPa – Sand or investment casting
Data Sheet by ASD-STAN Standardization, 03/31/1988