ASD-STAN prEN 2155-20
Test methods for transparent materials for aircraft glazing — Part 20: Determination of retention of strength after crazing for as-cast acrylics
Data Sheet by ASD-STAN Standardization, 10/31/2000
Side Navigation
X
ASD-STAN prEN 2265-003
Cables, electrical, for general purpose – Operating temperatures between – 55 deg C and 150 deg C – Part 003 : Ink jet printable – Product standard
Data Sheet by ASD-STAN Standardization, 02/28/1995
ASD-STAN prEN 4094
Heat resisting alloy – NI-CH1305 (NiCr16Co10Mo8Al4Ti4) – Vacuum melted – Non heat treated – Remelting stock
Data Sheet by ASD-STAN Standardization, 12/31/1997
ASD-STAN prEN 2660
Heat resisting alloy CO-CH1401 – As cast – Remelting stock
Data Sheet by ASD-STAN Standardization, 06/30/1995
ASD-STAN prEN 3550
Aluminium alloy (2024) – Solution treated, stretched and artificially aged (T8511) – Extruded bars and sections (a or D) <or= 150 mm
Data Sheet by ASD-STAN Standardization, 10/17/1988
ASD-STAN prEN 4368
Heat resisting alloy NI-CD1701 (NiCo15Cr10Al6Ti5Mo3) – Non heat treated – Remelting stock
Data Sheet by ASD-STAN Standardization, 12/31/1997
ASD-STAN prEN 2683
Aluminium alloy AL-P7010- T7651- Hand forgings – a <or= 150 mm
Data Sheet by ASD-STAN Standardization, 04/30/1998
ASD-STAN prEN 3095
Sealants — Test method – Determination of extended assembly time
Data Sheet by ASD-STAN Standardization, 09/30/1998
ASD-STAN prEN 2655
Aluminium alloy 2017A-T42 – extruded bar and section – 1,2 <or= (a or D) <or=150 mm – with peripheral coarse grain control
Data Sheet by ASD-STAN Standardization, 05/01/1985
ASD-STAN prEN 2346-005
Aerospace series – Cable, electrical, fire resistant Operating temperatures between 65 deg C and 260 deg C – Part 005: DW family, single UV laser printable and multicore assembly Light weight – Product standard
Data Sheet by ASD-STAN Standardization, 01/31/2005