IEC 61534-1 Ed. 2.1 b:2014
Powertrack systems – Part 1: General requirements CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 06/30/2014
Side Navigation
X
IEC 61326-1 Ed. 1.0 b:2005
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements
standard by International Electrotechnical Commission, 12/15/2005
IEC 61202-1 Ed. 4.0 en:2016
Fibre optic interconnecting devices and passive components – Fibre optic isolators – Part 1: Generic specification
standard by International Electrotechnical Commission, 12/08/2016
IEC 61196-5 Ed. 2.0 en:2012
Coaxial communication cables – Part 5: Sectional specification for CATV trunk and distribution cables
standard by International Electrotechnical Commission, 09/26/2012
IEC 61557-8 Ed. 2.0 b:2007
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 8: Insulation monitoring devices for IT systems
standard by International Electrotechnical Commission, 01/29/2007
IEC 61249-3-3 Ed. 1.0 b:1999
Materials for printed boards and other interconnecting structures – Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) – Adhesive coated flexible polyester film
standard by International Electrotechnical Commission, 02/10/1999
IEC 61249-2-38 Ed. 1.0 b:2008
Materials for printed boards and other interconnecting structures – Part 2-38: Reinforced base materials, clad and unclad – Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
standard by International Electrotechnical Commission, 11/27/2008
IEC 61340-6-1 Ed. 1.0 b:2018
Electrostatics – Part 6-1: Electrostatic control for healthcare – General requirements for facilities
standard by International Electrotechnical Commission, 09/24/2018
IEC 61228 Ed. 2.0 b:2008
Fluorescent ultraviolet lamps used for tanning – Measurement and specification method
standard by International Electrotechnical Commission, 01/10/2008
IEC 61377-3 Ed. 1.0 b:2002
Railway applications – Rolling stock – Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
standard by International Electrotechnical Commission, 09/26/2002