IEC 61726 Ed. 2.0 b:1999
Cable assemblies, cables, connectors and passive microwave components – Screening attenuation measurement by the reverberation chamber method
standard by International Electrotechnical Commission, 11/30/1999
Side Navigation
X
IEC 61701 Ed. 1.0 b:1995
Salt mist corrosion testing of photovoltaic (PV) modules
standard by International Electrotechnical Commission, 03/22/1995
IEC 61621 Ed. 1.0 b:1997
Dry, solid insulating materials – Resistance test to high-voltage, low-current arc discharges
standard by International Electrotechnical Commission, 09/17/1997
IEC 61587-1 Ed. 2.0 b:2007
Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297 – Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
standard by International Electrotechnical Commission, 03/20/2007
IEC 61340-3-1 Ed. 2.0 b:2006
Electrostatics – Part 3-1: Methods for simulation of electrostatic effects – Human body model (HBM) electrostatic discharge test waveforms
standard by International Electrotechnical Commission, 12/13/2006
IEC 61300-3-51 Ed. 1.0 b:2014
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-51: Examinations and measurements – Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
standard by International Electrotechnical Commission, 10/10/2014
IEC 61300-2-1 Ed. 3.0 b CORR1:2010
Corrigendum 1 – Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
Corrigenda by International Electrotechnical Commission, 01/14/2010
IEC 61300-2-34 Ed. 2.0 b:2009
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-34: Tests – Resistance to solvents and contaminating fluids of interconnecting components and closures
standard by International Electrotechnical Commission, 05/13/2009
IEC 61755-3-6 Ed. 1.0 b:2006
Fibre optic connector optical interfaces – Part 3-6: Optical interface – 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
standard by International Electrotechnical Commission, 11/27/2006
IEC 61337-1 Ed. 1.0 en:2004
Filters using waveguide type dielectric resonators – Part 1: Generic specification
standard by International Electrotechnical Commission, 11/02/2004