IEC 60287-2-1 Ed. 3.0 en:2023
Electric cables – Calculation of the current rating – Part 2-1: Thermal resistance – Calculation of the thermal resistance
standard by International Electrotechnical Commission, 05/01/2023
Side Navigation
X
IEC 61676 Ed. 2.0 b:2023
Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
standard by International Electrotechnical Commission, 03/01/2023
IEC 63171-7 Ed. 1.0 en:2023
Connectors for electrical and electronic equipment – Part 7: Detail specification for up to 7 ways including PE or FE (data/power) and shield pin, free and fixed circular connectors for balanced single-pair data transmission with current-carrying capacity – Mechanical mating information, pin assignment and additional requirements for type 7
standard by International Electrotechnical Commission, 05/01/2023
IEC 60068-2-17 Ed. 5.0 b:2023
Environmental Testing – Part 2-17: Tests – Test Q: Sealing
standard by International Electrotechnical Commission, 06/01/2023
IEC 62807-3-10 Ed. 1.0 en:2023
Hybrid communication cables – Part 3-10: Outdoor hybrid cables – Family specification for FTTA hybrid communication cables
standard by International Electrotechnical Commission, 02/01/2023
IEC GUIDE 115 Ed. 3.0 b:2023
Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
standard by International Electrotechnical Commission, 04/01/2023
IEC 63241-2-6 Ed. 1.0 b:2023
Electric motor-operated tools – Dust measurement procedure – Part 2-6: Particular requirements for hand-held hammers
standard by International Electrotechnical Commission, 07/01/2023
IEC 63474 Ed. 1.0 b:2023
Electrical and electronic household and office equipment – Measurement of networked standby power consumption of edge equipment
standard by International Electrotechnical Commission, 05/01/2023
IEC 62282-8-301 Ed. 1.0 b:2023
Fuel cell technologies – Part 8-301: Energy storage systems using fuel cell modules in reverse mode – Power-to-methane energy systems based on solid oxide cells including reversible operation – Performance test methods
standard by International Electrotechnical Commission, 05/01/2023
IEC 61249-2-51 Ed. 1.0 b:2023
Materials for printed boards and other interconnecting structures – Part 2-51: Reinforced base materials, clad and unclad – Base materials for integrated circuit card carrier tape, unclad
standard by International Electrotechnical Commission, 05/01/2023