ISA 75.08.05-2002 (R2007)
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
standard by The International Society of Automation, 11/19/2002
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
standard by The International Society of Automation, 11/19/2002
Area Classification in Hazardous, Classified, Dust Locations : 12.10
standard by The International Society of Automation, 04/01/1988
Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)
standard by The International Society of Automation, 04/15/2014
Explosive Atmospheres – Part 29-2: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen
standard by The International Society of Automation, 06/27/2012
Security for industrial automation and control systems, Part 4-2: Technical security requirements for IACS components
standard by The International Society of Automation, 08/13/2018
Graded Approaches To Setpoint Determination
standard by The International Society of Automation, 10/15/2005
Control Valve Aerodynamic Noise Prediction
standard by The International Society of Automation, 04/01/1989
General Requirements for Clamp or Pinch Valves
standard by The International Society of Automation, 12/20/2013
Control Valve Diagnostic Data Acquisition and Reporting
standard by The International Society of Automation, 09/20/2006
Flow Equations for Sizing Control Valves
standard by The International Society of Automation, 04/01/1985