Side Navigation

X

SAE AMS4233D

Aluminum Alloy, Welding Wire 4.5Cu – 0.70Ag – 0.30Mn – 0.25Mg – 0.25Ti (201)
standard by SAE International, 05/09/2022

SAE AMS2632C

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
standard by SAE International, 06/02/2022

SAE AMS4939D

Titanium Alloy Sheet, Strip, and Plate 3Al – 8V – 6Cr – 4Mo – 4Zr Solution Heat Treated
standard by SAE International, 05/16/2022

SAE AMS6953A

Titanium Alloy Sheet, 6Al ¿¿¿ 4Sn ¿¿¿ 3Nb ¿¿¿ 0.5Mo ¿¿¿ 0.3Si, Duplex Annealed
standard by SAE International, 05/24/2022

SAE AMS4354A

Aluminum Alloy, Plate, 7.9Zn ¿¿¿ 1.8Cu – 2.0Mg – 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged
standard by SAE International, 04/25/2022

SAE J2698_202206

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design¿¿¿Truck and Bus
standard by SAE International, 06/22/2022

SAE AMS4133F

Aluminum Alloy Forgings and Rolled Rings 4.4Cu – 0.85Si – 0.80Mn – 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
standard by SAE International, 06/09/2022