• 2022-05-04
• Admin
• no comments

SAE J3064_202201

Standard Specification for Allowable Defects in Rolled Goods for Interior Trim
standard by SAE International, 01/28/2022

• 2022-05-04
• Admin
• no comments

SAE J2534-1_5_00

Recommended Practice for Pass-Thru Vehicle Programming
standard by SAE International, 01/05/2022

• 2022-05-04
• Admin
• no comments

SAE MA3448A

BOLT, SPLINE DRIVE SPECIAL EXTENDED WASHER HEAD, REDUCED HEAD, PD SHANK, AMS5708, METRIC
standard by SAE International, 01/14/2022

• 2022-05-04
• Admin
• no comments

SAE SAE1008

Standard Practice for Force Protection and Survivability
standard by SAE International, 02/14/2022

• 2021-11-23
• Admin
• no comments

SAE AMS2759/1J

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
standard by SAE International, 08/03/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4765G

Silver Alloy, Brazing Filler Metal 56Ag ¿¿¿ 42Cu ¿¿¿ 2.0Ni 1420 to 1640 ¿¿F (771 to 893 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4762C

Silver Alloy, Brazing Filler Metal 40Ag – 30Cu – 30Zn 1245 to 1340 ¿¿F (674 to 727 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021

• 2021-11-23
• Admin
• no comments

SAE AMS2631F

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate
standard by SAE International, 06/22/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4474B

Aluminum Alloy, Sheet and Plate 4.0Cu – 1.0Li – 0.40Mg – 0.35Ag – 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
standard by SAE International, 09/13/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4921R

Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength
standard by SAE International, 07/07/2021