• 2021-11-23
• Admin
• no comments

SAE AMS5225G

Iron-Nickel Alloy, Strip 49Fe – 5.3Cr – 42Ni – 2.5Ti – 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction
standard by SAE International, 06/01/2021

• 2021-11-23
• Admin
• no comments

SAE AMS2642F

Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
standard by SAE International, 11/03/2021

• 2021-11-23
• Admin
• no comments

SAE AMS7410

Rubber: Fluorocarbon Elastomer (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant 70 to 80 Shore Type A Hardness Low Temperature Sealing Tg -47 ¿¿F (-43.9 ¿¿C) for Elastomeric Seals in Aircraft Engine, Fuel and Hydraulic Systems
standard by SAE International, 10/06/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4507J

Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu – 30Zn Half Hard (H02)
standard by SAE International, 10/28/2021

• 2021-11-23
• Admin
• no comments

SAE AMSSTD595A_A2

Colors Used in Government Procurement
Amendment by SAE International, 09/01/2021

• 2021-11-23
• Admin
• no comments

SAE AMS5832J

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni – 19Cr – 3.0Mo – 5.1Cb(Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode or Vacuum Induction Melted
standard by SAE International, 10/18/2021

• 2021-11-23
• Admin
• no comments

SAE AMS5791D

Cobalt Alloy, Powder, Plasma Spray 56.5Co – 25.5Cr – 10.5Ni – 7.5W
standard by SAE International, 05/19/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4910S

Titanium Alloy, Sheet, Strip, and Plate 5Al – 2.5Sn Annealed
standard by SAE International, 06/10/2021

• 2021-11-23
• Admin
• no comments

SAE AS126275D

STUD – STRAIGHT, CADMIUM PLATED, STEEL, SAE 8740, 125 KSI MIN, .3125-18UNS-3A X .3125-24 UNF-3A
standard by SAE International, 08/17/2021

• 2021-11-23
• Admin
• no comments

SAE AMSQQA250/24C

Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant) (Stabilized: May 2021)
standard by SAE International, 05/21/2021