SAE ARP4946A
Recommended Design and Test Requirements for Hydraulic Check Valves
standard by SAE International, 08/12/2021
Side Navigation
X
SAE ARP1987B
Titles, SAE G-3 Committee Document, Selection of (Stabilized: Oct 2021)
standard by SAE International, 10/21/2021
SAE AS4108D
T-Bolt and Eye Bolt, A286 CRES, 1000 ¿¿F Fatigue Rated
standard by SAE International, 09/01/2021
SAE AMS4761C
Silver Alloy, Brazing Filler Metal 38Ag – 32Cu – 28Zn – 2.0Sn 1200 to 1330 ¿¿F (649 to 721 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021
SAE AMS5611G
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12Cr Ferrite Controlled, Annealed, Consumable Electrode Melted
standard by SAE International, 07/19/2021
SAE AMS4635H
Aluminum Bronze Bars, Rods, and Forgings 87Cu – 9Al – 3Fe Stress Relieved
standard by SAE International, 07/07/2021
SAE AMS4128E
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
standard by SAE International, 06/28/2021
SAE ARP7987
Development, Verification, and Validation of a Thermal Model for Determining Current Derating Design Limits of Aerospace Wires and Wire Bundles
standard by SAE International, 08/18/2021
SAE AMSR81903A
Remover, Acid Activated, For Amine-Cured Epoxy Coating Systems (Stabilized: May 2021)
standard by SAE International, 05/06/2021