• 2021-11-23
• Admin
• no comments

SAE J2312_202106

Automatic Transmission Intake Filter Test Procedure
standard by SAE International, 06/22/2021

• 2021-11-23
• Admin
• no comments

SAE AS1895/22E

COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
standard by SAE International, 06/22/2021

• 2021-11-23
• Admin
• no comments

SAE AIR6975

Hard Bearing Balancing Machine Technology – Proper Use of Rotor Type-Specific Calibration
standard by SAE International, 05/19/2021

• 2021-11-23
• Admin
• no comments

SAE AS21440C

BEARING, ROLLER, NEEDLE, TRACK ROLLER INTEGRAL STUD, SEALED, TYPE VIII ANTIFRICTION, INCH
standard by SAE International, 10/06/2021

• 2021-11-23
• Admin
• no comments

SAE USCAR36-1

DIMENSIONAL AND PERFORMANCE SPECIFICATION FOR AFTER-MARKET GASOLINE ENGINE OIL FILTERS
standard by SAE International, 05/13/2021

• 2021-11-23
• Admin
• no comments

SAE AMS5585J

Steel Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe – 21Cr – 20Ni – 20Co – 3Mo – 2.5W – 1.0Cb (Nb) – 0.15N Solution Heat Treated
standard by SAE International, 11/09/2021

• 2021-11-23
• Admin
• no comments

SAE AS9503C

BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A
standard by SAE International, 07/23/2021

• 2021-11-23
• Admin
• no comments

SAE AMS4465B

Aluminum Alloy, Clad One Side Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 23 Brazing Sheet) As Fabricated
standard by SAE International, 07/07/2021

• 2021-11-23
• Admin
• no comments

SAE AMS3670/3C

Bar, Rod, and Shapes Produced from 12% Graphite – 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material
standard by SAE International, 05/19/2021

• 2021-11-23
• Admin
• no comments

SAE AMS5561H

Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn – 20Cr – 6.5Ni – 0.28N High-Pressure Hydraulic
standard by SAE International, 10/12/2021