IEEE Bundle-2019
Click here to purchase
– Active.The purpose of these guides are to present some basic considerations for the selection of neutral grounding parameters that will provide for the control of ground-fault current and overvoltage on all portions of three-phase electric utility systems. The factors to be considered in the selection of a grounding class and the application of grounding methods are discussed. General considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power systems are given in these guides. The neutral grounding of single-and three-phase ac electric-utility primary distribution systems with nominal voltages in the range of 2.4 kV – 34.5 kV is addressed. Basic factors and general considerations in selecting the class and means of neutral grounding for a particular ac transmission or sub transmission system are covered. This bundle includes: IEEE Std C62.92.1-2016, IEEE Std C62.92.2-2017, IEEE Std C62.92.3-2012, IEEE Std C62.92.4-2014, IEEE Std C62.92.5-2009, and IEEE Std C62.92.6-2017
Product Details
- Published:
- 08/14/2019
- ISBN(s):
- 9781504460675
- Number of Pages:
- 0
- File Size:
- 1 file , 8.1 MB
- Product Code(s):
- STDBN23820
IEEE Bundle-2019
Click here to purchase
The IEEE Std 1547 series of interconnection standards with electric power systems (EPS) is a benchmark milestone demonstrating the open consensus process for standards development. It covers the technical specifications for, and testing of, the interconnection and provides requirements relevant to the performance, operation, testing, safety considerations, and maintenance of the interconnection. It includes general requirements, response to abnormal conditions, power quality, islanding, and test specifications and requirements for design, production, installation evaluation, commissioning, and periodic tests. These requirements are universally needed for interconnection of distributed resources, including synchronous machines, induction machines, or power inverters/converters and will be sufficient for most installations. It specifies the type, production, and commissioning tests that shall be performed and provides technical background and application details.It specifics alternative approaches and good practices for the design, operation, and integration of distributed resource island systems with electric power systems. It provides recommendations and guidance on the distribution secondary networks, including both spot networks and grid networks. Further, it does not interpret IEEE Std 1547 or other standards in the IEEE Std 1547 series. It also provides tips, techniques, and rules of thumb, and it addresses topics related to DR project implementation. IEEE 1547-2018, IEEE 1547-2018 Errata, IEEE 1547.1-2005, IEEE 1547.1-2005 Interpretation, IEEE 1547.2-2008, IEEE 1547.3-2007, IEEE 1547.4-2011, IEEE 1547.6-2011, IEEE 1547.7-2013, and IEEE 1547.1a-2015
Product Details
- Published:
- 06/26/2019
- ISBN(s):
- 9781504459303
- Number of Pages:
- 0
- File Size:
- 1 file , 18 MB
- Product Code(s):
- STDBN23742
IEEE Bundle-2019
Click here to purchase
– Active.SINGLE-USER LICENSE:– These standards cover topics such as various field test methods that are currently available or under development and shielded insulated power cable systems rated 5 kV and above. The standards also describe the tests and gives advantages and disadvantages, suggested applications, and typical results. Complete guides covering some of the test methods listed are available in the form of IEEE 400 “point” documents. It also Includes the recommended practices and procedures for acceptance and maintenance testing of shielded, laminated dielectric insulated power cable systems 5 kV and above is presented. Describes very low frequency (VLF) withstand and diagnostic tests and the measurements that are performed in the field on shielded power cable systems. Whenever possible, cable systems are treated in a similar manner to individual cables and the diagnostic testing of new or service-aged installed shielded power cable systems, which include cable, joints, and terminations, using partial discharge (PD) detection, measurement, and location.This bundle includes 5 active IEEE standards in the 400 family which are: IEEE 400-2012, IEEE 400.1-2018, IEEE 400.2-2013, IEEE 400.3-2006, and IEEE 400.4-2015, a savings of over 55% of single item.
Product Details
- Published:
- 04/23/2019
- ISBN(s):
- 9781504457484
- Number of Pages:
- 0
- File Size:
- 1 file , 7 MB
- Product Code(s):
- STDBN23654
IEEE Bundle-2019
Click here to purchase
– Active.The 1900 bundle goes beyond simple, short definitions by providing amplifying text that explains these terms in the context of the technologies that use them. It also describes how these technologies interrelate and create new capabilities while at the same time providing mechanisms supportive of new spectrum management paradigms such as dynamic spectrum access. It will aid in the optimization of radio resource usage, including spectrum access control, in heterogeneous wireless access networks. It interfaces and service access points defined in IEEE Std 1900.4TM are described in detail, enabling distributed decision making in heterogeneous wireless networks and obtaining context information for this decision making.It includes procedures, protocols, and message format specifications for the exchange of sensing related data, control data, and configuration data between spectrum sensors and their clients. In addition, specifications for the exchange of sensing related and otherre relevant data and related interfaces between the data archive and otherre data sources have been added. It also defines a vendor-independent set of policy-based control architectures and corresponding policy language requirements for managing the functionality and behavior of dynamic spectrum access networks. This bundle includes: IEEE 1900.1-2019, IEEE 1900.2-2008, IEEE 1900.4-2009, IEEE 1900.4a-2011, IEEE 1900.4.1-2013, IEEE 1900.5-2011, IEEE 1900.5.2-2017, IEEE 1900.6-2011, IEEE 1900.6-2011/Cor 1-2015, IEEE 1900.6a-2014, IEEE 1900.7-2015.
Product Details
- Published:
- 05/20/2019
- ISBN(s):
- 9781504458412
- Number of Pages:
- 0
- File Size:
- 1 file , 27 MB
- Product Code(s):
- STDBN23693
IEEE Bundle-2019
Click here to purchase
– Active.The IEEE Std. 45 series supports the development of electric installation on shipboard. Recommendations for the design, selection, and installation of equipment on merchant vessels with electrical apparatus for lighting, signaling, communication, power, and propulsion are provided and controls, control applications, control apparatus, and automation on shipboard and for generator control panels and switchboards on ship are established by this series along with recommendations for systems engineering, design, and integration of electrical power systems at the total ship level from concept design through the establishment of the design baseline prior to detail design. It covers electrical safety considerations for shipboard electrical systems and equipment including a review of fundamental concepts pertaining to electrical safety and establishing electrical safety programs and work practices associated with the operation and maintenance of shipboard electrical power distribution systems. This bundle includes: IEEE 45-2002, IEEE 45.1-2017, IEEE 45.2-2011, IEEE 45.3-2015, IEEE 45.5-2014, IEEE 45.6-2016, IEEE 45.7-2012, IEEE 45.8-2016, and IEEE 45.4-2018, a savings of 44+% over single sale.
Product Details
- Published:
- 04/23/2019
- ISBN(s):
- 9781504457477
- Number of Pages:
- 0
- File Size:
- 1 file , 13 MB
- Product Code(s):
- STDBN23653
IEEE Bundle-2019
Click here to purchase
– Active.IEEE 1609(TM) Series covers methods for securing WAVE management messages and application messages, with the exception of vehicle-originating safety messages. It also describes administrative functions necessary to support the core security functions. The wireless access in vehicular environments (WAVE) architecture and services necessary for WAVE devices to communicate in a mobile vehicular environment are described in these standards.Layers 3 and 4 of the open system interconnect (OSI) model and the Internet Protocol (IP), User Datagram Protocol (UDP), and Transmission Control Protocol (TCP) elements of the Internet model are represented. Multi-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physical layers (PHYs). Electronic payment service layer and profile for Payment and Identity authentication, and Payment Data transfer for Dedicated Short Range Communication (DSRC) based applications in Wireless Access in Vehicular Environments.It also describes the use of these identifiers, indicates identifier values that have been allocated for use by WAVE systems, and specifies the allocation of values of identifiers specified in the WAVE standards.The series includes: IEEE 1609.0-2019, IEEE 1609.2-2016, IEEE 1609.2a-2017, IEEE 1609.2b-1019, IEEE 1609.3-2016, IEEE 1609.4-2016, IEEE 1609.11-2010, IEEE 1609.12-2012. A savings of over 74% single sales.
Product Details
- Published:
- 07/09/2019
- ISBN(s):
- 9781504459891
- Number of Pages:
- 0
- File Size:
- 1 file , 14 MB
- Product Code(s):
- STDBN23764
You May Also Like
